Posts Tagged optimisation

4 Practical Ways to Lower Your AdWords CPCs

Posted by Alan Mitchell in Techniques on July 27th, 2011

WordStream last week carried out some fascinating research on Google AdWords CPC prices of different sectors. One key finding was that the finance industry carried high CPCs of up to $54.91, while other service-related sectors such as education, law and health also exhibited expensive CPC prices of over $30.00.

It’s All Relative

Since CPC prices are often closely linked to the potential profitability of a sale from that keyword, the CPC price is often a mute point. A ‘bad credit history remortgage’ could be worth $15,000 profit to a remortgage broker, so having CPCs in excess of $50.00 can deliver a strong return on investment.

On the other hand, the keyword ‘New York weather’ has little commercial intention, so keywords such as this tend to benefit from low CPCs.

While this relativity of CPC prices makes CPC comparisons across sectors rather meaningless, most PPC advertisers would jump at the chance to pay lower CPCs. So below are 4 strategies I’ve found useful for achieving lower CPCs, while still maintaining a strong conversion rate.

 

Source: Wordstream

Read the rest of this entry »

, , , , , , , , , , , , , , , , , , , , , ,

1 Comment

3 Tips for AdWords Ad Scheduling Success

Posted by Alan Mitchell in Techniques on July 25th, 2011

Ad scheduling – an advanced feature of Google AdWords – allows PPC advertisers to set different bids for different days of the week and different hours of the day. If your business is closed on weekends, you can pause your ads on weekends. If most of your sales come through on weekday mornings, setting higher bids on weekday mornings can result in higher profitability.

But while ad scheduling in Google AdWords can be extremely powerful in boosting campaign performance, it is essential that ad scheduling decisions are reliable and informed. Since so many internal and external factors can bias your day of the week analysis, advanced ad scheduling strategies are best reserved for mature and relatively stable PPC campaigns with a large amount of conversion data.

Below are three tips for getting the most out of ad scheduling, and suggestions to help you make reliable and informed decisions to take advantage of this powerful feature of Google AdWords.

Read the rest of this entry »

, , , , , , , , , ,

5 Comments

5 Common PPC Optimisation Mistakes

Posted by Alan Mitchell in Techniques on June 21st, 2011

You’ve researched hundreds of long-tail keywords, organised them into granular ad groups, and crafted ad messages which closely match the ad group’s keywords. You then set your Google AdWords campaigns live.

But after a while, you realise your PPC campaigns are not delivering the desired return on investment. You start making changes to bids, budgets, and keywords. Still no improvement, so you make more changes.

And so on.

It’s not long until you’ve lost track of what’s working and what’s not. Your keywords and ad groups become disorganised, your Quality Scores start to fall, and you start paying excessively high CPCs to chase after visitors and sales.

If any of this sounds familiar, perhaps you need to take a step back and review your campaign optimisation strategy. Are you making intelligent and informed decisions based on reliable, insightful, and unbiased data? Or are your bids being changed and keywords paused in a random and haphazard fashion in a drastic effort to improve results?

Below are 5 optimisation mistakes I’ve found myself guilty of from time to time, and some tips on how to avoid these common pitfalls.

 

Read the rest of this entry »

, , , , , , , , , , ,

5 Comments

The Art of Keyword Qualification

Posted by Alan Mitchell in Techniques on April 14th, 2011

Advertisers looking to promote their products or services through Google AdWords often face a difficult challenge when deciding which keywords to target. Some keywords will naturally be more relevant than other keywords, so where do you draw the line? When researching keywords in which to show your ads, how do you decide which keywords to use and which to avoid?

Unfortunately, there is no definitive rule on the types of keywords which are relevant (which you should show your ads), and which are  not relevant (which you should avoid). After all, what’s relevant to a large advertiser may be irrelevant to a small niche advertiser. This lack of a boundary can make it extremely difficult to decide where to draw the line when researching possible keywords.

But as long as you consider the principle of keyword qualification, everything will be fine! If you understand how different keywords in your AdWords account naturally have different levels of qualification, keyword research and ad group organisation become a whole lot more effective.

Let’s see how.

Read the rest of this entry »

, , , , , , , , , , ,

6 Comments

Modified Broad Match – How To Increase AdWords CTR and Reduce CPCs

Posted by Alan Mitchell in Techniques on October 19th, 2010

Back in July, after 2 months of successful beta testing, Google rolled out a much awaited improvement to their often notorious AdWords broad match. Modified Broad Match – or the Broad Match Modifier – allows Google AdWords advertisers to place plus signs in front of their keywords to better control the types of searches which trigger their ads. Since every word in the keyword which contains a preceding plus sign must be included somewhere in the user’s search query, modified broad match provides advertisers with an extra level of control over the search queries which trigger their ads.

While this extra degree of control was largely welcomed by PPC advertisers, modified broad match no doubt adds an extra degree of complication to Google AdWords management. However, as we will see from four seperate modified broad match experiments, if modified broad match is used correctly, it can be extremely effective in significantly increasing click through rates (CTR) and lowering cost per click (CPC) prices of Google AdWords campaigns.

Read the rest of this entry »

, , , , , , , , , , , , , , , , , , ,

28 Comments

The Broad Match Generator

Posted by Alan Mitchell in Techniques on May 20th, 2010

Google AdWords gives pay per click advertisers a wealth of tools to create, test and optimise highly-targeted pay per click (PPC) campaigns. One of the methods of doing so is through match type: exact, phrase and broad.

While exact and phrase match keywords are generally more controllable than broad match keywords, broad match can open up your business to a significant number of additional customers – those who might otherwise have been missed if only exact and phrase match keywords were used.

As we consider the pros and cons of each match type, we find that a balance is therefore required between the extra visitors broad match can deliver, and the quality of those extra visitors. In trying to find that balance, we consider a technique called the Broad Match Generator, which uses broad match search queries to generate new exact, phrase and negative keywords. We see how the methodical process of regularly analysing  search query data, to continually expand keyword lists and ad text relevancy (Broad Match Generation), can help take advantage of the opportunities of broad match while still delivering a strong return on investment.

Read the rest of this entry »

, , , , , , , , , , , , , , , , ,

18 Comments

Intelligent Analytics for Intelligent AdWords Management

Posted by Alan Mitchell in Techniques on September 15th, 2009

All too often keywords in a paid search account are evaluated based solely on their ability to generate conversions: leads, bookings or sales. If a keyword has an unacceptable conversion rate or an unsatisfactory return on investment (ROI), it is paused or its bid is greatly reduced.

Sometimes, if conversion data is scarce, click-through-rate (CTR) is instead used to evaluate a keyword’s performance. If a keyword generates only 5 clicks from 1,000 impressions, it has a CTR of 0.5% so is deemed irrelevant. The keyword is then paused or relegated to the second page of search result obscurity.

This is not the right approach. Read the rest of this entry »

, , , , , , , , , , , ,

10 Comments

The 10% Clicks Rule Part 3: Does It Work?

Posted by Alan Mitchell in Techniques on July 22nd, 2009

Welcome to the final part of the Clicks Rule special.

You may remember the 10% Clicks Rule is a technique to help identify the areas of your Google AdWords account which could benefit most from your time and effort (if not, you may want track back to Part 1: Overview and Part 2: Process).

What I want to do now is evaluate the rule using a real AdWords campaign data to assess its viability. Does it work? Does it help PPC management? Does it actually help improve results? Is 10% the right figure?

Read the rest of this entry »

, , , , , , , , , , , , ,

4 Comments

The 10% Clicks Rule Part 2: Process

Posted by Alan Mitchell in Techniques on July 21st, 2009

Welcome to part 2 of the Clicks Rule special.

You may be familiar with a technique I shared in recent post called the 10% Clicks Rule (if not, you may want to come back once you’ve skimmed through Part 1: Overview). In essence, the 10% Clicks Rule is a technique that aims to improve the relevancy of ads for search queries which have broad or phrase-matched to one of you keywords. Since it is impractical to give every possible keyword or search query its own ad group with personalised ads, the 10% Clicks Rule helps to identify those ad groups which are most likely to benefit from your time and effort.

Part 1 was all theory. What I want to do now is provide a step-by-step guide explaining how to identify those ad groups in your own AdWords account which could greatly benefit from your insight. All we’re trying to do here is run a Google AdWords search query report at ad group level, filter out exact match keywords (to leave broad and phrase match only) and highlight those ad groups with more than 10% of broad and phrase clicks. These are the ad groups we want to look at. So if you’re a seasoned AdWords and Excel pro, feel free to skim through the bullets or jump ahead to Part 3: Does it Work?. For everyone else who might need a little more guidance, continue reading for a detailed step-by-step guide.

Read the rest of this entry »

, , , , , , , , , , , , ,

1 Comment

The 10% Clicks Rule Part 1: Overview

Posted by Alan Mitchell in Techniques on July 20th, 2009

Welcome to the first of a 3-part Clicks Rule special.

Here’s the theory

No more than 10% of total broad and phrase clicks in your Google AdWords account should come from a single ad group. If more than 10% of your total broad and phrase clicks comes from a single ad group, the keywords in that ad group are being over broad-matched or over phrase-matched. Too many searches are going to that ad group’s broad and phrase-match keywords, so the ad group could benefit from keyword expansion and search query analysis.

Read the rest of this entry »

, , , , , , , , , , , ,

3 Comments